Technical requirements:

工作范圍：手臂半徑≥2000mm；

Working range: Arm radius ≥ 2000mm;

手腕載荷能力：≥10Kg；

Wrist load capacity: ≥ 10Kg;

左右行程：≥10000mm；

Left and right stroke: ≥ 10000mm;

往復速度：0～0.6m/s；

Reciprocating speed: 0-0.6m/s;

往復定位精度：≤±2mm。

Reciprocating positioning accuracy: ≤ ± 2mm.

自動噴涂裝置采用噴涂機器人，噴涂機器人為防爆型，確保噴涂系統安全運行。機器人行走軸由機架、精密線性滑軌、伺服電機配齒輪齒條、電線與氣管拖鏈組成。機器人行走軸采用防漆霧污染、防爆設計，保證運行安全可靠。具有跟蹤噴涂功能，可配置網絡接口。配置彩色屏手持編程單元。拖鏈采用國產優質的高速無噪聲型坦克鏈。

The automatic spraying device adopts spraying robots, which are explosion-proof to ensure the safe operation of the spraying system. The robot walking axis is composed of a frame, a precision linear sliding rail, a servo motor equipped with gear teeth, wires, and a gas pipe drag chain. The robot's walking axis adopts anti paint mist pollution and explosion-proof design, ensuring safe and reliable operation. Equipped with tracking spraying function and configurable network interface. Configure a color screen handheld programming unit. The drag chain adopts domestically produced high-quality high-speed and noise free tank chains.

供漆及噴涂系統用于防熱涂料、面漆的配料、供料和噴涂。防熱涂料、面漆噴涂各單獨配置1套。供漆及噴涂系統由配料桶、分散機、油漆攪拌器、隔膜泵、調壓閥、壓力表、輸送管路、自動噴槍等組成。配料桶和分散機用于配料，采用轉速≥200r/min的防爆型分散機、不銹鋼配料桶，安裝在調漆室。

The paint supply and spraying system is used for batching, feeding, and spraying of heat resistant coatings and topcoats. One set of heat resistant coating and one set of topcoat spraying are provided separately. The paint supply and spraying system consists of a batching bucket, a disperser, a paint mixer, a diaphragm pump, a pressure regulating valve, a pressure gauge, a conveying pipeline, an automatic spray gun, etc. The batching bucket and disperser are used for batching, using explosion-proof dispersers with a speed of ≥ 200r/min and stainless steel batching buckets, installed in the paint mixing room.

油漆攪拌器采用氣動攪拌的方式，并配有不銹鋼雙槳葉攪拌和不銹鋼攪拌桶，防止沉淀，清洗方便。供漆系統加料位置不應與自動噴涂裝置動作存在干涉，避免加料時自動噴涂裝置對操作人員產生傷害。隔膜泵、自動空氣噴槍采用進口產品，調壓閥、壓力表、涂料管等采用進口或國產優質產品。供漆及噴涂系統支架采用不銹鋼材料制作。配置壓縮空氣過濾裝置，對廠房提供的壓縮空氣進行凈化，保證噴涂質量和設備運行可靠。

The paint mixer adopts a pneumatic stirring method and is equipped with stainless steel double blade stirring and stainless steel stirring bucket to prevent sedimentation and facilitate cleaning. The feeding position of the paint supply system should not interfere with the action of the automatic spraying device to avoid injury to operators caused by the automatic spraying device during feeding. The diaphragm pump and automatic air spray gun are imported products, and the pressure regulating valve, pressure gauge, coating pipe, etc. are imported or domestically produced high-quality products. The bracket for the paint supply and spraying system is made of stainless steel material. Equipped with a compressed air filtration device to purify the compressed air provided by the factory, ensuring spraying quality and reliable equipment operation.

本文由機器人自動噴粉線整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://www.1122pvbj.cn我們會有更多精彩內容等你查看。

This article is organized and published by the robot automatic powder spraying line. Do you have any understanding of these contents? For more information, please click on: http://www.1122pvbj.cn We will have more exciting content waiting for you to check out.